Groth 8391B Uživatelský manuál

IOM-8391B Ref. ID: 95600 ©2008 Groth Corporation Installation, Operation and Maintenance Manual for Model 8391B Waste Gas Burner

9 Groth Waste Gas Burner Onsite Inspection Checklist Model No.: Serial No.: Factory Thermocouple Set Point: Factory Timer Settings: Factory Pilot Fue

10 PRODUCT LIMITED WARRANTY A. Seller warrants that products which are manufactured by Seller, are manufactured in accordance with publ

11

12

13

14

15

16

17

1 TABLE OF CONTENTS: INTRODUCTION 2 TABLE 1: MAIN ASSEMBLIES 2 INSTALLATION 3 SYSTEM CHECKOUT 3 SAFETY PRECAUTIONS 4 OPERATION INSTRUCTIONS 4 I

2 INTRODUCTION: This manual is intended to provide recommended procedures and practices for installation, operation, and maintenance of

3 INSTALLATION: Mount the flare stack vertically by bolting to a standard ANSI 150# pipe flange with a suitable gasket, or mount the anchor plate wi

4 SAFETY PRECAUTIONS: 1. When burner is operating, all personnel should maintain a safe distance from the unit. 2. The ignition electrode provides

5 Note: The maximum thermocouple temperature that the pilot flame can achieve is dependent on various factors; pilot fuel, fuel pressure, ambient te

6 electrode with care because the internal ceramic insulators can be easily damaged. When replacing, make sure the electrode housing is approximately

7 3. If any of these displays are incorrect, there is a problem with the thermocouple or the controller. If a thermocouple signal

8 3. Pilot gas supply shutoff or low pilot gas supply pressure. 4. Restriction in pilot gas supply line or inspirator air intake. Inspirating ventu